Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
glcd mikroc 16f887
to use this with a pic32 you would need a display driver with a lot of ram.
For 16bit colour you would need 768k - SSD1962 or an equiv epson would do the job.
Cheers
ntfreak
dac3550a driver source code
I have not used this design, but looking at the source the buttons have not been implemented yet.
So its upto you to add the button interface, just pick a spare port such as PORTF would be a good choice.
Cheers
ntfreak
vs1001 mp3 decoder in india
I would imagine it will work fine, cannot see any reason why someone would put a non working project on the net.
Looking at the schematic it has a ISP header so the micro can be programmed on board.
Cheers
ntfreak
sta013 mp3 decoder
Yes the black lines as you say are not connected together.
They are shown like this to simplify the schematic, you still treat the nets as separate connections.
Like i said before AD5 is only connected to AD5 on each end of the bus. And so it is not connected to AD4 for...
what is mp3 ref
This is a schematic bus, very common thing in larger schematics as it keeps the schematic clean and understandable.
The wires are not connected together, they are still connected to their respective nets.
For example AD5 is connected to pin49 of the ATMega and both U2 pin7 and...
If i remember correctly this error was added in newer version of OCD Commander.
Try adding a link between pins 8 and 15 of the parallel connector.
** Sorry the above was for the parallel port wiggler, not the raven **
Regards
NTFreak
Re: Tft LCD display
You are best of using a driver such as epson or SSD1906, downfall is they require a emi bus (external memory).
You will have to convert from jpeg as the display drivers use raw pixel format, eg. bitmap binary data.
Regards
NTFreak
Just received my Realice this week, it makes working with the dsPIC a bit easier.
In time it will replace the ICD2, simply it is a ICD2 with an fpga todo a lot of the work.
Just got to wait a bit for 8 bit support - i have been told in the new year.
Cheers
NTFreak
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.