Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Would 40 AH battery charger work better (without causing damage and without reducing the battery life) to charge 2 batteries lead acid of 85 AH each i.e. in parallel 170 AH (total 170 AH) ?
thanks
I want to control a motor (pump) speed via vfd in such a way that when temperature of the water increases the pump speed also increased and when temperature of the water decreases the speed of the motor (pump) also decreased ..... can we used external PID control with a VFD OR use a VFD having a...
Re: How to calculate the delay time for soft starter ?
basically there's a damper attached to this motor and this motor is used to **** up the dust and fumes produce during melting process of metal scrap by induction furnace (oven) ........
it takes 80 seconds to reach its max. speed and...
Re: What's the need of using both protocols i.e. MODBUS & Ethernet (TCP/IP) in a sing
I have seen a PLC that have both communication protocols i.e. MODBUS & Ethernet (TCP/IP) .... so i just want to know why both communication protocols are used with that PLC .....
What's the need of using both protocols i.e. MODBUS & Ethernet (TCP/IP) in a single P
What's the need of using both protocols i.e. MODBUS & Ethernet (TCP/IP) in a single PLC ?
Can we calculate amps in each core of a multi-core cable ?
If 3 core cable of 1.5 mm size can withstand 17 amps in open air then almost 6 amps are passing through each of the three cores or 17 amps current is passing through each cores ?
Thanks in advance
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.