Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Thanks vfone for your kind reply.
i have 6 x6 elements and i used to have in the x-direction for example half wavelength distance between the elements.
but what about the distance between the elements in the y-direction i started form the minimum distance between each two elements which depend...
Thanks vfone for your valuable answer.
Do think that i have to change the shape of all elements?
i was thinking to change the shape and/or orientation of some elements of the only the last row in my case the 6th row
Hi all
i am desining a kind of antenna array in multilayer structures 6x6 elements
i have a problem with the total gain/radiation pattern.
it has 12 degree tilt i want to keep the broadside beam in 0 degree
How can i compensate this 12 degree?
Thanks in advance for your answer
Mohamed
Re: How to terminat microstrip with 50 ohm at 60 GHz
Thank you Roman for your answer, also i found new product on https://www.barryind.com/
Barry Introduces DC-60GHz Chip Termination with >18.5dB RL for Ultra-Broadband Application
but i am not sure about the prices , so it may be very...
How to terminat microstrip with 50 ohm at 60 GHz
hi all ,
i am working in a structure at 60 GHz, and i am asking How to terminate or make a termination with 50 ohm at 60GHz. so , i can use it in microstrip technology.
thanks in advance,
Dear all
i want to know how to draw the array factor from S21 paramteters,for example i have an antenna array and simulated it in HFSS and i want to extraxt the S21 and calculate the array factor?
can anyone help me
thaks in Advance
mohamed
Hi everbody!
it is my first time to work with HFSS-IE design i do not know how to defie waveport and radiation box as a boundary condition, If there is another choice to do taht or it not available in HFSS-IE design?
If anyone has a toturial for a complete example how to design and assgin...
Hallo!
i made the simulation for your project and it is works normally and i get the result
right click on Results and then select what you want to draw for example this is s11 result of your design
Mohamed
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.