Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by mickey123

  1. M

    Transmitter antenna for a particular frequency

    What should ideally be used as the transmitte ?
  2. M

    Transmitter antenna for a particular frequency

    Is it possible to use a mobile phone's Bluetooth as a transmitter and a patch antenna at 2.4 GHz as a receiver for RF Energy harvesting so that a considerable amount of voltage is received at the output ? Please help me thanks in advance :)
  3. M

    RF Energy harvesting for mobile phone charging

    I wanted some resources that could help me in building one myself or some previous practically implemented research work
  4. M

    RF Energy harvesting for mobile phone charging

    Is it the signal strength ? It is -93 dBm If not how do I find it out ?
  5. M

    RF Energy harvesting for mobile phone charging

    Is there any implemented model and circuit of an RF energy harvesting circuit to charge a mobile phone? Thanks in advance :)
  6. M

    Properties of Aluminium 7075

    Actually, I needed some properties like permittivity for simulating in CST
  7. M

    Simulation of a CubeSat in CST

    Here are the images when I placed the antenna below the frame and in front
  8. M

    Simulation of a CubeSat in CST

    meaning how much space should be there between the antenna and the frame? what is used to fix it to the frame ?
  9. M

    Simulation of a CubeSat in CST

    How do we fix the Antenna to the frame ?
  10. M

    Properties of Aluminium 7075

    Please can anyone help me with the properties of Aluminium 7075 so that it can be used to model the material for a CubeSat frame in CST Thanks in advance :)
  11. M

    Simulation of a CubeSat in CST

    Yes, these are the pictures First without the frame When the antenna is placed on the side of the frame with bolts When it is placed at the bottom of the frame without bolts I have used the material for the frame as Aluminium and (patch and ground plane of antenna as copper pure)
  12. M

    Array Antenna Design

    Please can anyone tell me what to do when the standard formulae for spacing and width,height calculations of antenna elements and corporate feed in a patch antenna array (mine is 2x2) are not feasible to be implemented since the specifications for the antenna substrate are very small? Thanks in...
  13. M

    Simulation of a CubeSat in CST

    1. Is it that the ground plane of the patch antenna and the metal of the frame get added up to give different results? 2. How are the patch antenna and frame connected....I got a CAD file of the frame which is imported into CST and placed the antenna on one of its sides and simulated it...the...
  14. M

    Transmitter antenna for a particular frequency

    Since I had already designed a patch antenna mainly resonating at this frequency. I will try using the circuit for other frequencies. Thanks for the help :)
  15. M

    SMA to SMA connector

    Actually, I have been told to observe the frequencies of resonance of an antenna in the frequency domain. When I connected the antenna, there is no spectrum visible at the frequencies of resonance of the antenna. Is it necessary that it receives the particular frequencies from the surroundings...
See more

Part and Inventory Search

Back
Top