Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
so i got the problem i have not idea how to convert without errors digital signal form like aiken biphasic to F2F if u like to digital square form , i wanna send that kind of signal via some digital transmitter like RXQ-1 or use some of programmable chip...
Re: choose for RF (help)
thanks 2 Vfone , maybe it exactly what i need , did u work with this chip ? i not read datasheet yet , but which matter is most for me is configurations of this chip, because i never working with the programmable chip ...
Re: RFIC Transceiver nRF2401
can someone say me this stock TRW-24G and TRF-24G is ready to use ? i mean i just conect battery and input signal just it or i still needed to configure ?
2 binalmis , I can't explain for u how to cut glass with the Soldering iron because my english is very bad for it , so just take Soldering iron in u hands use some glass ,use some water or some paste for soldering (for good contact between glass and...
choose for RF (help)
i needed some RF solutions based on one chip -requests --> very stable prefer in range 433mhz-2GHZ frequency ,data transfer from 50 kbit/sec ( much better from 80-100kbit/sec) very good if digital input (or analog input) have sensitivity...
9e5 microcontroller
damn it , answer from regional distrib -Today we can ofer:
nRF2401 stock ( 1 week maximum ) 4.00 EUR / unit
nRF905 Stock ( 1 week maximum ) 4.82 EUR / unit
No stock for nRF24E1 or nRF9E5. 8 weeks lead time.
)))) i can't bay 24E1 goddamn it
Re: easy radio modules
this range is not so good , but it depend inside of which kind of bilding u will use it for example for 2.4GHZ wave long as = 12.5 sm that mean if between details of metallic scelet of bilding have more them 13 sm u can use it...
nrf9e5 reset nordic problem
that means for 2401 needed external controller to be present in scheme with EEPROM and i can't except external controller from scheme because after power is reset chip can't upload programm from EEPROM ?or for 2401...
read configuration register nrf2401
thanks PENRICO now i understood all about 24E1 ( the little problem is on u software i see on button 2401 not 24E1 ) may it work also for 2401 ? also i suppose i needed some help , may you help me to compose...
eeprom 2401 scheme
to PENRICO , well i have look a picture of programmer scheme and if i right i must connected it on parallel printer port LPT ? , and quest after i upload the programm can i except the EEPROM from scheme ? i...
Re: Which Antenna for 750MHz
well i recommend u next way ,, u must use for best result antenna long as 7500/750x4=40 sm ( antenna length=radio wave) or just 1/2 =20 sm or 1/4 length wave =10 sm( but 20 sm is 2 time less , for 10sm length power output...
nrf24e1 eeprom timing
well. thanks for all , i try again read datasheets and FAQ on http://nvlsi.no , but what for this EEPROM ? for load program ?ok understood , but this EEPROM needed to be presend in scheme or after i load program and configured all , can...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
