Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The information is exchanged between the card and reader through radio wave, so it need both of them follow the same communication protocol. At present, the domestic commonly used contactless IC card protocol: ISO14443A, ISO14443B , ISO15693 etc.commonly used IC card:
ISO14443A: Common l
MR790 series, based on NXP PCD or compatible PCD, is the high performance USB PC/SC interface desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO144
MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. The
MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The reader supports series IC cards according to ISO14443 & ISO15693; various contactless IC card under international standard; especially the contactless CPU c
JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compliant with ISO7816 (T=0 and T=1). And also it supports SAM card(38400bps)which was used in domestic card management system.
JMY602 has various functions a
JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then u
MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED Nixie tube which with 8 bits LED display. The reader fully supports the IC card according to ISO14443A, ISO14443B, ISO15693 and ISO7816(T=0 & T=1); Various contactless IC card under
MR701 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ISO14443, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader
JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then u
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.