Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi
I designed 1:2 unequal wilkinson power divider for array antenna with Er=2.2 h=.254mm in ADS
The impedences for power divider are z0=30ohm z1=Z0*sqrt(k*(1+k^2))=34.15(90deg) z2=z0*sqrt((1+k^2)/k^3)=54.12(90deg) z3=z0*K=26.74 z4=z0/k=33.66 and R=61.6ohm..
The distance between the elements...
I need to design 8X8 phased array antenna initially i designed 4X4 array antenna with SLL is low .. but i need SLL=20db .. Can u give me the formula for taylor series for rectangular array with SLL=20db please
hi
i want to design switched line phase shifter for 8X8 microstrip patch array antenna at 35GHZ using transmission lines. Can anybody give idea about how to design it in ADS ?
Hi
Thanks for your reply..This is 4X4 patch array antenna . The gain is 18.33db and first sidelobe is 4.335.element spacing is .9lamda.. How to get 25db sidelobe suppresion?
hi i ve designed 4X4 microstrip patch array antenna at 35GHZ using ADS
the parameters i m getting are
returnloss =-25.86
directivity is 18.56 dbi
gain= 11.23dbi
gain is very low
so i want to ask that what is the range of the gain and how can i increase the gain my antenna
plz guide me
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.