Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Can anyone recommend a supplier that can provide good type of RF cable & SMA connectors that can support RF measurements for the the following specification?
1) RF Frequency Range: 800MHz to 6GHz
2) RF Power: Up to 40dBm
Hi Tony & Ejunear,
Here are some further details on my project:
i) The 3 stage PA line up need to have high linear ouput at 36dBm. So each stage requires a minimum linear gain of 10dB
ii) The existing predriver & driver stage is able to meet this spec but there is no final PA that can go up...
Hi folks,
I'm trying to design a 3 stage PA line up consisting of pre-driver, driver & a final PA. The predriver & driver stage has been designed & my focus now is to design the final PA that needs the following goals to be achieved:
1) Power= 1.8 Watt or 2 Watt
2) Frequency range=...
Hi every1,
I would like to know whether a plyer with pneumatic ability exists in the market or not.If yes, can any1 show the link to this type of product??
Thanks.
c++ brush
Hi people,
I'm in great need for guidance to brush up on C/C++ languange.I do have a reference book on C/C++ language.However i need to practice more questions besides the one from the book to enhance my understandings.Wat i need now is a website or some guidance to help me practice...
Re: Need info about PC serial communication data buffer size
Hi IanP,
Thanks for the info and link.
However does the same buffer size apply for using activX components like MSCOMM for building GUI using softwares like Visual C++ or Visual Basic ?? or is it set to 4K bytes as i've mention in...
Hi every1,
I'm just wondering, wat is the data buffer size for most PC's serial communicatiom.
when i tried to send a text file about 5 Kb using hyperterminal, i'm only receiving about 4Kb back to the PC for display.I even used other available GUIs like termV1.9 b and the same effect occurs...
hi guys,
i'm just wondering wat causes data errors or data lost due to line noise for a serial communication?
any other additional causes?
So what is the best way to over come data errors or data lost?i know we can use CRC to settle this probelm but is it the best?
Hi guys,
I checked in da datasheet of PIC16f877 and i looked at TABLE 10-4 n i c dat there is baud rate error about 0.16% for a 20 MHz crystal which operates at 9.6kBaud.
so i'm curious to know whether this small percentage of error could cost lost of bytes for a packet serial communcation...
Hi people,
I recently posted a thread about data truncation problem with text file encryption. I overcame the problem by placing a delay function(sleep) in my pc application.
However when i tried to encrypt a plain text file, i notice that sometimes there are missing bytes(1,2,3 or more...
Hi every1,
I recently manage to implement the AES encryption algorithm into my PIC16f877. However when i send a text file larger than 16 bytes to my PIC using UART, the 2nd block data onwards is getting truncated. I very much think that i need to set a delay in my pc application so it sends...
data encryption&decryption using microcontroller
hi every1,
Just to make sure, i only make comparison with data in the RCREG once the RxBuffer is full with 16 bytes.So, the data in the RX Buffer is not compared to <CR> or <LF> characters.Only the byte that comes after the 16 byte is compared...
p16_tiri.asm
Hi every1,
Recently i posted a thread regarding text file encryption implementation in PIC16f877 using the AES algorithm.I was advised by ric to work with block of 16 bytes first before i could proceed with encryption.Eventually, i manage to send block of 16 byte serially by...
p16_tprp
hi every1,
i wrote a pc application in Visual C which could send text file by block of 8 bytes.i short pin 2 and 3 of the serial port to test the GUI without any hardware.i was able to get back data by block of 8 bytes.any incomplete block is padded with a space character.
Later i...
motorola interview questions
hi people,
i would like to have some useful links or e-books which i would like to refer for motorola interview questions.
Does ne1 have it?
Regards,
ganavel9783
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.