Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Guys, I solved the problem. Turns out that the lamp housing has a protection plate that functions as an interlock. Surprisingly, if you remove that plate, the controller doesn't turn on, not even the fan or the display. That was quite a surprise after two days of troubleshooting...
Hi everyone!
I'm using a power supply (mod. Oriel 68907) in my lab to power a 500W Xenon lamp for a solar simulator, but the power supply wasn't turning on yesterday (display off, fan off, etc.). I asked the manufacturer but since this is an old part (1999), they don't have support available and...
Hi everybody, I have a problem with my my 1030...
I bought it used in the US and I immediately changed all the capacitors...
I then got back to my country (Italy) and I decided to change the transistors as well, since the amplifier was making a very strange noise...
I then bought a transformer...
I used a IN4937 and a 180 ohms resistor but the light is very dim... do you know why?
- - - Updated - - -
should I use a transistor to amplify the signal?
Hi everyone, I have an old Marantz amplifier with a broken lamp. The lamp is rated 8V AC 200mA. However, I used my multimeter to measure voltage and current: Voltage is 7.33 V AC and current is 5.68 mA (first silly question: do I have to use the AC amp or DC amp setting? cause the AC amp setting...
Hi everybody, I have a problem with an electret mic. I searched the forum but i wasn't able to find an answer. I'm pretty new in this field so I hope you can understand my low level... :)
I am design a sound following robot, and I decided to use two electret mics. First problem is how to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.