Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by floatgrass

  1. F

    software reset & hardware reset???????

    in fact hardware reset sometime is produced by software, for example mcu send the reset signal to gpio which connect some chip reset pin.
  2. F

    who can provide hdmi transmitter programmer reference

    who can provide the silicon image 9030 hdmi transmitter programmer reference? thanks!
  3. F

    how do I write embedded eeprom?

    I want to let eeprom to store key and eeprom i2c interface do not connect with host interface. How do I write the key into the embedded eeprom? thanks!
  4. F

    Questions about hdcpRngCipher implementation

    Re: hdcp thanks for your reply. you means LM0 is lfsr module, BM0 is block module in hdcp cipher structure? CM0 is block module and output function? the right usage of hdcprngcipher : 1 let CM0 work for some clocks to produce an after power on ? 2 let CM0 work 56 clocks to porduce an after...
  5. F

    how to design asynchronous read and write register

    thanks for all reply. my application is cpu write and read data of configuration register at some clock frequency, but hardware engine use these configuration data as input signals. 1 double clock for control signals, these control signals including write and read enable ,not including...
  6. F

    how to design asynchronous read and write register

    hi, all I want to different clock domain to read and write register file.How do I deal with the metastablility problem? thanks!
  7. F

    looking for an English language teacher or a friend

    I have added you to my friends list but I do not know when you will be online. I will be online at Beijign time 19:00 to 24:00.
  8. F

    looking for an English language teacher or a friend

    Thanks for your reply. I will contact you soon.
  9. F

    Questions about hdcpRngCipher implementation

    I am doing hdcp. I have a question about hdcpRngCipher implementation. 1 first AN value is generated by using random number seed. 2 other AN value is generated by hdcpBlockCipher sequence and mi,ki. I want to ask which modules can work during hdcpRngCipher? if the operation mode is same...
  10. F

    looking for an English language teacher or a friend

    Hello everyone, I am a hardware engineer. I want to promote my spoken English. And I can teach you Chinese also. Welcome to contact me for language studying or technical interests. My interesting field includes analog circuit design, power circuit design, MCU/ARM/DSP application, stream medai...
  11. F

    what's the meaning of "set_output_delay -min -1.0 ...&q

    set_output_delay example set_output_delay -min -min= Thold -Tc Thlod is the hold time of flip-flop. Tc is output of chip minimum path delay.
  12. F

    Where to start learning ASIC sensor design?

    Sensor IC's Optoelectronic Devices: Advanced Simulation and Analysis (Hardcover) by Joachim Piprek (Editor) "For the theoretical analysis and modeling of semiconductor lasers, it is desirable to have access to reliable absorption/gain and refractive index calculations
  13. F

    How can I do power consumption estimation with VCD file?

    you can use vcs simulation tool to do power consumption estimation with VCD file. you can also use primepower or power compiler.
  14. F

    H.264 Decoder IP core

    I can not find it on internet, so write one yourself.
  15. F

    Ask about the timing in FPGA...

    dragon_boat's answer is easier for u. you can divide ur frequency with a rather large number your chip supports. then delay 1s is easy by timer. good luck

Part and Inventory Search

Top