Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
pc123 optocoupler datasheet
Thanks for your great responces...
I intended to use the opto isolator at the input of my PCB directly after the connection of patient..
My PCB use an ordinary 12 V AC/DC adaptor, so there's a danger for patient from the 50 hz interference.
I thought that the best...
optocoupler tutorial
I'm designing an ECG cuircuit.
I need to use Opto Coupler to isolate the human body from the electronic circuit and the power supply.
I've got 4N35 opto-coupler. I've the datasheet but still don't know how to connect the 4N35.
Anyone can help...?
Thanks alot.
Hi all,
I know nothing about microcontrollers or PIC's.
I just want an ADC to apply an analog signal to pc and process it with matlab.
I think Analog/Digital conversion by microcontrollers are better and cheaper, is that right?
I want anyone to help me choosing one to satisfy my needs.
What...
matlab comunicação digital
I have a specific question, hope i can explain what i want exactly.
I've designed a GUI as a small program.
My problem is how to terminate the program or to close it.
I made a pushbutton and changed its string to CLOSE.
I make the callback of this button as
close...
9v bipolar 4.5v split
Thanks FVM,
So i may apply this circuit as it is except for adding a 10 ohm resistor in the feedback path of each opamp,( i.e between pins 1,2 and pins 6,7).
Is that right?
Should this resisrtor have the same values with R3 & R4 or it's not important.
The last thing, what...
circuit to split a single power source into 2 dc
My circuit diagram is not ready right now. I don't have a soft copy of it.
I thougt that it's easy to explain the splitter circuit to me, which i may use or apply for any general circuit not a specific one.
Just like the circuit i've found and...
bipolar power supply schematic +4.5 -4.5
I've found this circuit.
**broken link removed**
I wanted to share it with others.
what's ur opinion about it. Is it good.
And what about 1458? Is it LM1458.
It's a dual opamp. Is it noisy or good?
Can i use LM358 instead?
Will this circuit work well...
lm358 virtual ground
Hello,
I want to design a simple circuit to generate +4.5 v and -4.5v from a single 9 volt.
I'm designing a small circuit, and instead of building my own power supply i decide to buy a regular 9 volt dc adapter as a power supply.
I want not to use batteries to guarantee a...
matlab psk with broadband interference
can anyone help me.
I wanna matlab code for calculating the herat rate or a heart beat for an ecg monitor.
It's the last step in my project.
I've made some code but it's not so accurate.
Anyone can help.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.