Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hellor Klaus,
Thanks for your response.
I did, no response received. I heard the OEM was bought by another company which is Advance Energy. Already emailed them but no response from their side.
Hello fellow EDA members!
Good Day to you all..! :)
Is there anyone that could help me decode the interlock for the HiTek MV2000-151-01. Anyone familiar with this interface?:thinker:
This interface label is different, i have no idea which pin to short or to supply with voltage to enable...
Hello Frank! Thanks for your response. I guess I can use the unit temporarily while waiting for the new unit. Thanks thanks..
- - - Updated - - -
I agree, but at least the effect will not be that extreme to create a boom right? :)
Hello Masters...
I have a question. I hope you guys can help me.
I have an adjustable ac-dc converter.
Rated Output is 27VDC, 5.6A. On specs it says that "Adjustable output voltage (-5% to +10%)"
I want to use this unit to get a 24vdc power supply. Is that possible? I am done to fine tune it to...
I already contacted Epcos if possible for them to provide the datasheet or replacement for this component. Im still waiting for the response.
- - - Updated - - -
Hello Brian,
I don't think measuring the component itself is reliable.
Diode Test: 0.091 Vdc
Resistance Check: 109 Ohms
- - -...
Thanks FvM. Maybe I can start with this reference to search for the datasheet for this z-diode. I just need the datasheet so I can find alternative for this component if ever it is totally obsolete in the market.
Hello FvM,
Thanks for your msg. I assume its zener base on this website **broken link removed**
Actually I cannot Power up the Unit and test the zener voltage.
1. Zener was shorted already.
2. Main unit unable to power up because it needs the interlock from the plc. So we need to install inside...
Hello Mrinalmani,
Actually I cant proceed buying it because i cant found the datasheet for this component so i cant identify the correct specification for this component. So if you could help me identify this component, it would be great! then i can proceed on sourcing for this component or try...
Hello Guys,
Anybody here can please help me to identify this zener diode? It would be very helpful if anybody can provide the datasheet for this zener. I would like to buy this zener diode but unfortunately i cant found the datasheet. Thank you very much!
Hi amayilsamy, Thanks for your reply. I still not doing the load test. its actually dropping even without load.
When I turn on the p/supply. U can get the output (12v, -5v, 5v) but its dropping fast. till no reading on your multi-tester. Then turn on again, but same situation. get output for a...
Hi All,
I have a power supply with multiple outputs. 12v, 5v, -5v. When I power up the unit. I can measure the output voltages but its dropping very fast, from 12v drops to 0, from 5v drops to 0. Anybody knows the possible cause? I already changed the filter caps but still same.. Thanks in advance!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
