Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hello,
i have a grundig tv set (29304) (schematic url is at the end) with an east-west-problem (i dont know if this is the technical name - at least in german it is known under this name) - this means the picture is smaller in the middle, than on the top or bottom.
It looks )_( instead of [_]...
Thank you very much!!!
"Alpha and Omega" is the name of the company...
found the datasheets on their site: http://www.aosmd.com/web/products/product_display.jsp?displayType=mosfet_part&partnumber=AO4411 (if anyone needs them also)
Thx, now ill start to do some debugging or search for a...
user manuel voltkraft 632fg
Thank you again...
with your help i was able to repair my voltcraft osci.
A resistor, which is in the focus-path was defect (but not overloaded)...
thx
Daniel
Hi!
I have got a defect notebook (want work at all... dosent react on any (power-)key). On the mainboard i have found 4 SMD-ICs grouped together, 2 of them a visually defect (overloaded). I have attached a picture of them.
I wasnt able, sofar, to find out the use of them nor the IC-company who...
voltcraft oscilloscope
Does anybody have a circuit or service-manual for the Voltcraft 632FG-Osci?
Image: https://www1.conrad.de/xl/1000_1999/1200/1200/1201/120191_LB_00_FB.EPS.jpg
I have problems with the focus-control... since some days the beamwith is still controll-able with that knob...
Re: Alternativ WebServer
Hi!
Yepp, thx for the comment... Meanwhile ive found something looking really impressive: https://openwrt.org/
it works with the linksys products and some Asusrouter. I think, ill put my hands on some of those...
Daniel
pic 18.432mhz circuit layout
For those who need some additional help according to the baud-matching-problem (if it is even one) ive designed a little xls-tool.
Just set the xtal-fq and you get the matching (+/- 3%, acc. to the datasheet) baudrates.
Ive attached it - if someone needs it, its...
ds89c450 programmer
I have some pics of my first running DS89C450 attached. It is a 8-Bit MCU@24Mhz driven blinking Led :). how usefull!
So, now i can study the mc51 architekture a bit... iam normally used to the AVR (Atmel's 8bit riscs) - But ive heard a bit of 8051 at my previous school...
ds89c450 uart timer tmod
Yep... thx for your post... ive read the errata already before... in my case (now i use a 24Mhz xtal) the maxBaud (acc. to this formula) would be ~20kbaud. But the matching to one of the timer-reloads was the problem. I dont know, why they had used only a few possible...
ds89c450 user guide
Wuha! Gotcha!!
Thank you - it works!
I never thought, that ther may be a problem with Bauds> 9600. Iam used to AT AVRs and ther i never had matching-probs with bauds up to 115200 at 8Mhz.
But again: thx!!
Daniel
89c450 clock configuration
Hi!
> I've just got two '450's myself
Two? Samples i guess?!? Ive also get them as samples. :-)
Thx for the hint - i often forget to check these things, but not this time... Ive used differnt terminalprograms on different computers with different platforms (telnet...
ds89c450
Hi!
Does anybody ever tried somthing with a DS89C4[3/4/5]0 Microcontroller? Ive 2 of them and tried to communicate with the ROM-Loader (which should be onchip) - but without success.
Ive set it up on a problem-board, with a xtal (12mhz) and pulled the rst high, the /EA and /PSEN low...
ipaq service manual
Does anybody have something like a Servicemanual for HP's iPaq?
Especially i need some infos of the accu-to-ipaq connection of iPaqs with internal Accu (like 3970).
Or a Pinout of the external Connectors of an iPaq would be also very fine!
Thx, Daniel
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.