Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: Hi.. everyone..
Hi Rajat,
For becoming a good dsp engineer, you need to have all basics clear in your mind. All fundamentals to be clear. Maybe you can refer some books like Rabiner & Gold.
Matlab is a tool. It is used for matrix operation initially.But now it has been used extensively to...
Re: designing of FIFO
Hi,
The first thing you need to consider is the depth of the fifo.This is determined by the read and the write speed(Its the ratio).
Since this is a synchronous fifo, so managing read and write pointers for accesing the fifo is not a tough job. Remember, write pointer...
Re: q of verifiction?
Hi,
verification is done pre-silicon while testing is post-silicon.
Verification is done in the pre-silicon stage to check the desired functionlity of the design.
Testing is done in post-silicon stage to detect faults in manufecturing etc
Regards,
dak-ju
Re: Dual port FIFO
Hi Kumar_eee,
I think any computer organization book will have fifo description.You can get idea about fifo from any standard computer organization book.However, for special type of fifo like asynchronous fifo, you can follow the Snug paper for the design of an asynchronous...
Hi,
Multiplexed flip-flop scan styles specifies that internal clocks driven by multiplexer (or multiple input gate) output pins are to be treated as separate clocks for the purpose of architecting scan chains. The -internal_clocks option is used by both command - set_scan_configuration and...
Re: color TV
Hi IanP,
If you take a situation where R = 1, G = 0.1 & B = 1, then can we say that green signal is the biggest component of the whole equation?
I think biggest component depends on the value for R, G & B.
Best Regards,
dak-ju
Hi all,
I have a querry on the color signal transmission in color TV.
While transmission, the color difference signal is used using the red and the blue component.The green component is not used.
My question is - why the green component is not used?
Thanks and regards,
dak-ju
Hi Srik,
Regression is the process of running the entire test-base in batch mode.
In a typical environment, you would run a regression after every significant change in the DUT model.
Regards
dak-ju
Re: fdma??
Hi ,
Actually I didn't mean freq. div. multiple access. what I know is - fdma is a type of dynamic memory access(dma). I want to know how is fdma different from dma.
Regards
dak-ju
Hi,
I think the hot topics in digital design are
o. DSP based audio/video processing
o. High Definition Television
o. Low power mobile processors
Regards
dak-ju
Re: virtual clock
Hi,
Defining virtual clock is simple. Do it as below :
create_clock -name "clk_virtual" - period <value> -waveform {0 x}
Best Regards,
dak-ju
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
