Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I didn't have any lever switches laying about, so made use of what I had, seems to be working great now, I'll probably pickup a lever switch though and ditch the relay which I'm only using as the reed I have needed to be the other way round.
Thanks.
Ha ha, it probably is complicated for a simple cabinet light switch, but the issue I had was trying to mount the push switch and to have it in the right position when the door closes, as it's a gun cabinet there's no way of being inside when the switch engages to know exactly where to mount it...
I've been tinkering for last couple of hours, and upped the voltage to 13.5vdc and used a double pole relay to switch the +ve and -ve off to the led strip and this has solved the issue. Must have been something to do with voltage drop through the reed maybe?
My name is Ashley, I live in the UK, I work with alarm systems but have not worked at a component level for quite sometime.
I have a variety of bit at my disposal and have retro fitted my gun cabinet with a 12vdc led strip light.
The Magnetic contacts I use in work are what we call normally...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.