Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by csaba411

  1. C

    Information about 8086 microprocessor

    Microprocessors 8086 This is odd !?! My post and "IanP" post was removed ! by ?!
  2. C

    Information about 8086 microprocessor

    8086 microprocessor architecture slides "I am researching about Micro 8086." So waht is the problem ? You found this site! just keep searching and you will find a tons of info about this subject. Why you researching 8086 ? Its so outdated and hard to handle ...
  3. C

    Digital voltage comparator

    1-70 in what resolution ? 1 volt should be easy !
  4. C

    Strange problem as programs disappear from PIC16F

    Re: lost pic program... Your friends erasing your PIC's !:D
  5. C

    Does icprog supports PIC18F4580

    Just search this forum, there is plenty of design in here for RS232 and for USB, it will be a good experience for you to make one. In case you buy one, try to get a USB version, it is much faster for Debbuging and for uploading your software. As far as I konow there is no accessories comes or...
  6. C

    Does icprog supports PIC18F4580

    NO Go get a ICD2 from MC or make one. Csaba
  7. C

    Digital LED Clock For Football Stadium

    "football stadium" You mean 10 foot digits ? Not much of a different in size, use 500 led to make a segment. Csaba
  8. C

    What does the last part of PIC microcontroller name means ?

    microcontroller name PIC18F4580-E/P------Automotive-40C to +125C----Normal PIC18F4580-I/P------Industrial-40C to +85C----Normal PIC18LF4580-I/P-----Industrial-40C to +85C----Low Voltage Read page 421 or sec27.1.2.3 in here Csaba
  9. C

    Microstepping question

    can't help you, but you only have 36 point !?
  10. C

    LCD buzy bit in 8051 initialization

    Sending a low to high pulse to enable pin is the only way to read or write to the 44780 !
  11. C

    How to interface an LCD to 89c51 using 4 bit mode?

    interfacing of lcd with 89c51 JUST FUND IT ON THE NET. Please don't blame me if the info is incorrect. ****************** pin description LAMPEX-16200 1---Gnd 2---Vcc 3---Vo 4---Rs 5---R/W 6---E 7-14--DB0-DB7 15-16---LED BL -A&K ********************** Csaba
  12. C

    what different between pic 16c54 and 16f54?

    ic 16f54 Yes you can, but be sore your code is working, and it is the final. There is no second chance on the C's unless the windowed chip. And I'm sure there is no LV on the C's at all. The 16c54 can't be programmed the same way as the 16C84 of F84 and their new versions, I think for the C54...
  13. C

    PIC Volt & Amp Meterattin6

    pic volt meter assembler code If you buy yourself a F877A or *876, I'll send you the hex for it. Can't give you the source codes, it part of a project we have done in the past. csaba
  14. C

    Opinions on Proteus software

    proteus Yes it is really good for simulating Digital, Analoge and Mixed mode crkt. Also not cheap at all, you can buy a used car for that much money :), but show me an another software witch will do muches Proteus ! Licensing is also flexible, buy the option you'll need, and upgrade later ! I...
  15. C

    digital potentiometer

    Thanks VSMVDD, that would be nice ! I like to make device for ISIS so much, but just can't find a good book on it. csaba
See more

Part and Inventory Search

Back
Top