Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by chair_man

  1. C

    Nios ii de2 sof problem

    Dear Friends, The problem was that i have to assign the SDRAM1 for Reset and the same one for the program to record and send the program, it was just mismatch between architecture and software definitions.
  2. C

    How to import- NIOSII

    Dear Friends, The problem was that i have to assign the SDRAM1 for Reset and the same one for the program to record and send the program, it was just mismatch between architecture and software definitions.
  3. C

    Help about Wizcon And Gefran

    Dear friends, I could open the PQI file using the Norton Ghost version 9, this version is the best one to open old PQI file, other version as V12, V15,... can't do the work, it displays the file is corrupted. Please note this information.
  4. C

    Help about Wizcon And Gefran

    Dear Friends, i have a problem with my application, it is created under Wizcon Supervisor. I have a machine called MARIS works good, supervised by PLC from " Gefran" and with the Wizcon Supervisor from "Elution". The Application...
  5. C

    How to import- NIOSII

    How can we import a "software program" in eclipse software, this program is created by altera and it is inside the CD that comes with DE2-70. I used the traditional way is : "File-----Import----General----File system then Next to the last window, but by this way i couldn't Excute library Files...
  6. C

    Nios ii de2 sof problem

    Hi Jimmy Thank you for your reply, i verify and i find that i use Jtag and if i use Serial the program can't been sent. Please note the complete message when downloading the software: As i notice there is a Warning, is this...
  7. C

    Nios ii de2 sof problem

    Hi, I am a beginner and NOSII Quartus I operate Altera DE2, I wanted to use the SD card (memory card from my Altera DE2) board for a project. after sending the architecture of the example that comes with the CD named DE2_SD_Card_Audio, I encountered a problem while sending the executable...
  8. C

    Column and row scanning

    Hi, Thanks for your reply , please find attached the new program and tell what you see . Best regards.
  9. C

    Column and row scanning

    Hi , i created a program that manage the 3X4 keypad , and display the key pressed into LCD display , i compiled the code in MikroC for PIC and the compilation was successful , i get the HEX file and i put it into the PIC by the ISIS Version 7 software after creating the design . when i try to...
  10. C

    Column and row scanning

    dear friend , So how can i store numbers from keypad in MyArray[0],... Thanks for your support.
  11. C

    About pic usart Serial communication

    Sorry Wrong place where i post
  12. C

    About pic usart Serial communication

    Dear ckshivaram , As you told me on electronic mail , please see the file attached that contains all the C and Header files. Thanks For your Support.
  13. C

    About pic usart Serial communication

    DEAR FRIENDS, i want to establish communication between PIC and PC , then with PIC to GSM module , i'm working with PIC16F887. In PIC 16F887 there is an USART that we can use to establish serial communication , but the question is , can use just this...
  14. C

    Column and row scanning

    Dear Brian, The user press # one time to enter the full number , i use it for phone application to send informations into GR47 module , The details, basing on the phone numbers entred by the user and the Informations witch come from PC by RS232 , the PIC will send into the GR47 AT commands ...
  15. C

    Column and row scanning

    Thanks for your support friend, Please let me write the code i developp basing on your help , may be there are something that i should add. //first program //test matrix keyboard //hi-Tech #include<stdio.h> #include<16F887.H> #define L1 @ RA0 #define...

Part and Inventory Search

Back
Top