Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by budimanc

  1. B

    [Help] CodeVision + At Command

    because the is no command atqwe then the response will be error. Anyway i've found the problem. Thx
  2. B

    [Help] CodeVision + At Command

    Hi. I want to make a simple program to display my Siemens C35 to LCD using ATMega16 and CodeVision, but i get some difficulties in my programming language. Hope all of u can help me in this problem. My Source code is: Chip type : ATmega16 Program type : Application Clock...
  3. B

    ATMega16 + Siemens C35 + Code Vision AVR problem

    Thx. I found the problem. My tx n rx in my rs232 is wrong. Thx a lot for wandi for helping me.
  4. B

    ATMega16 + Siemens C35 + Code Vision AVR problem

    Hi everyone... I got some problems in connecting my ATMega16 to Siemens C35 by using CodeVision. I have tried connecting: 1. Siemens C35 to PC using HyperTerminal(from Windows) /Terminal (from CodeVision). The Result: OK 2. ATMega16 to PC by testing my USART(using MAX232) to computer. The result...
  5. B

    LCD to PIC16f877 in assembly

    eh i just got the solution, i just having a small mistakes in my proteus. Now i'm trying to generate text in lcd using cgram, but i dont know how. can you please modify this above program using cgram just to show A word using CGRAM not DDRAM
  6. B

    LCD to PIC16f877 in assembly

    Hi, i had some problem with my program, when i compile its seems ok. But when i tried simulate it in hardware simulation using proteus, the text doesnt appear. I'm using Port B as data dan Port A to control. Can you please check it. The program is ; LIST P=16f877, c=100, n=55, st= OFF ...
  7. B

    Problem in using USB ASP with ATMega 16 and 32-16PU

    Re: Problem in USB ASP but the pin between atmega8535 and atmega16 is the same. So the connection must be the same.
  8. B

    Problem in using USB ASP with ATMega 16 and 32-16PU

    Re: Problem in USB ASP but the target board i used is the same, i just change the chip in the target board. can you please help me. And i used the firmware usbasp.2009-02-28.tar.gz Thx a lot for your help
  9. B

    Problem in using USB ASP with ATMega 16 and 32-16PU

    Problem in USB ASP Hi, I have made a usb asp programmer in https://www.fischl.de/usbasp/ with the schematic is made by J.A. de Groot (usbasp_gr.rar). I have programmed the ATMega8 for the usb downloader and i found it working well and i have tested in my target board using ATMega8535-16PU. But...
See more

Part and Inventory Search

Back
Top