Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hello,
Sorry for the advertising, but i think it answer to the question :
Can I suggest to you to see here : www.pragmatec.net/catalog
in ARM7 kit.
Regards.
Bertrand
www.picos18.com
pic24 16mips 32 mhz
Just to correct one thing.
We can use ICD2 with PIC24 série.
I receive the explorer16 board from microchip and I can debug with my ICD2.
For information, our Free RTOS based on OSEK standard works well with these chip ( PIC24, dsPIC30 and dsPIC33). See our forum at...
Hello,
Just to annouce to you that Phoenix, based on PICos18 ( RTOS for PIC18) has been released for dsPIC series.
You can find source in the download section of the picos18 website : www.picos18.com.
Regards
Bertrand
Re: PIC O.S.
i am not sure you can have a REAL OS with a 16F.
If you can change to a 18F, you can use picos18.
information at www.picos18.com.
And its forums : www.picos18.com/forum/
VBR
Bertrand
Hello,
I am working on ARM7 dev board with a S3C44B0X which has a LCD controller.
My STN 640x480 LCD working well with.
Now, I want to change to a TFT version.
How can I do?
Does exist a simple external controller for TFT (max 800x600 256 colors)?
Can I adapt my S3C44 LCD controler to work with...
sja1000 schematic
Hello,
I have a problem to interconnect the SJA1000 ( CAN Controlle) with an ARM7TDMI ( S3C44BOX).
The SJA 1000 has a 8 bis multiplexed bus, well suited for microcontroller but not for an ARM!
I read in posts that I can use simple PLD to build an adress decoder and an output...
Re: PICos18 V2.00
Thanks for this remark.
The on-line tutorial is available in French and also in English.
So the document you reference should be one of the last in French only. It should be also the less importante.
Regards.
Bertrand
picos18 pdf
Hello,
For information, PICos18 v2.00 was released.
It is an RTOS for PIC18 series in GPL.It is a realy full preemptive kernel based on the OSEK standard.
in the web site, www.picos18.com ,you will find all source code and an online tutorial.
use the forum, www.picos18.com/forum...
Hello,
Some one give me a Hitachi LMG7420 240x128 graphic LCD.
The controller is a T6963C.
Is someone has the init code routine, and may be some grahical lib?
Thanks for your help.
Bertrand
My question is also : What can I do with the ISE Fundation 6 software? And what I can do without ( after the free 60 evaluation days) ?
Could I always developp with other free, Gnu IDE?
Should I start direcly with an other soft? which one?
Many thanks.
Bertrand
Hello,
I want to start with CPLD or FPGA. So I am very intersted by this bundle to learn.
I would like to know if it is the good choise for start and if all need soft equipment to build his own application is included.
Thanks for your help.
Bertrand
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.