Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
all those things are correct. programming with jtag also works correct and the fpga works correct, the only problem is the epcs1. it still gives that error. i 'dont know what it could be, is maybe my epsc1 broken?
@ first, thanks for your reaction,
i've created the pof file in quartus and then i'm getting this problem with quartus2:
Can't recognize Silicon id for device 1.
i checked my epcs1, and there's power on it etc.
what could be the problem?
with regard, Beijert
i've got a question about programming with quartus 2, my fpga:
To program the fpga through jtag mode isn't a problem but
i'm trying to program the Epcs1 but it won't work, i'm programming trought the...
Well, it works for a instant and
then the fpga doesn't count anymore.
i must reset then and then it works again for
an instant and then doesn't work.
i readed the 2 links, my problem is solved, thnx for your reactions
I'm new with fpga's and i have a problem.
I've got 2 incoming signals, A and B. i made an up and down 32 bit counter. When A is first then count up When B is first count down. Now i sent the data with I2C. but what happends,
If i only count. and no other codes. it works good...