Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by arni_jamal

  1. A

    problem with counter using led matrix... why not light on?

    Re: problem with counter using led matrix... why not light o ;=========================================================================== ; CRATE ON: 05 FEB 2006 ; COMPLETE ON 06-FEB-2006 ; DESCRIPTION:-- ; THIS PROGRAME IS USE FOR TWO DIGIT COUNTER USING DOTMATRIK DISPLAY ; PORTA CONNECTED TO...
  2. A

    problem with counter using led matrix... why not light on?

    Re: problem with counter using led matrix... why not light o and here is my circuit.. i am using the proteus...
  3. A

    problem with counter using led matrix... why not light on?

    hello everybody.. i've got a problem here where i can't see the display on my led matrix.. i'm doing a counter and using the led matrix as a display. i've writing a program using assembly languange. i also checking the voltage between each ic and each output.. the voltage showed around 4~5V...
  4. A

    DIY Moving Message Display

    digital clock in easy68k i'm doing a signboard display.. but during my test, all of the led in the dot matrix are light on.. what's the prb with my circuit or program?
  5. A

    DIY Moving Message Display

    7x16 matrix led i have 2 types of dot matrix here but i couldn't get the data sheet for both of it.. anybody can help me? 1- CSM-57362 (the 5x7 display) 2- CSM-88279A (the 8x8 diplay) please please help me!! urgent!!!
  6. A

    Arabic Font for LED Moving Message Display..

    write program make font for dot matrix hye dani: sorry i can't help you on solving diz problem.. Because i'm having the same problem with yours.. ~i dont know how to build font on LED matrix~ and i'm using 8x8 dot matrix n planning to use PIC16f84.. i hope someone out there can help us...
  7. A

    need help: LED count ouput displayer

    TQ VVV for the info...right no i'm starting to learn the basic of programming the PIC.. btw, in designing the project, what should i do first? the circuit or the programming? Added after 44 seconds: *now
  8. A

    need help: LED count ouput displayer

    i am still new in PIC programming.. i need help especially in programming the PIC.. the project is about: when the output comes out from the machine, i'll put the sensor to detect the object. then the LED displayer will display the quantity of the output.. the output can be up to 20 pieces.. -i...
See more

Part and Inventory Search

Back
Top