Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
smf05c sim300
This error occurs, that need to add the number of SMS server.
1. at+csca?
Reply: +CSCA: "+573103150030",145
OK
tip +57 it is area code.
2. AT+CSCA="+573103150030"
Reply: OK
3. AT+CMGS="3007857907" Do not include area code. (+57)
> Text
Reply: +CMGS: 57...
sim300d hardware
I have not been able to resolve the problem yet.
Spanish:
Aun no he podido resolver el problema. Estoy trabajando en otras cosas. No he tenido tiempo. Espero resolverlo luego.
work sim300d
I work with a 6-pin connector.
and what you propose, I do not understand very well, but to increase the value of series resistance of 50 ohms to 100 ohms for any 3 volt cards these stop working.
the idea of external regulation is feasible, but the goal is simply to work the...
sim300 not communicate proper
My sim300/304z module does not work with 1.8 volts simcards, not Energizer.
The sim300 module work fine with sim-cards of 2.8 - 3.0 vol. But don´t work with the sim-cards of 1,8 vol.
My test board has all fine. It has the capacitors of 0.22 uF, also the TVS and...
sim300d evb schematic
wasi_22382:
Thanks, your answer is very useful because some SIM-CARDs of 3 Vol not working and now working very well. But my problem with the sim-cards for 1.8 still persists.
I would appreciate your help in this matter.
is esd really a problem
I have a problem similar to yours.
The sim300 module work fine with sim-cards of 2.8 - 3.0 vol. But don´t work with the sim-cards of 1,8 vol.
My test board has all fine. It has the capacitor of 0.22 uF, also the TVS and the resitor pull up between VDD_SIM and DATA_SIM...
sim 3000 gsm module
The sim300 module work fine with sim-cards of 2.8 - 3.0 vol. But don´t work with the sim-cards of 1,8 vol.
My test board has all fine. It has the capacitors of 0.22 uF, also the TVS and the resitor pull up between VDD_SIM and DATA_SIM (10K).
I do not see the problem.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.