Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by amar_1

  1. A

    lookink for codes of MPLAB program to move the motor

    Give some details about motor and circuit you are using, because there are different circuits witch uses different logic to run a motor. regards amar
  2. A

    [MOVED] PIC16F628 | Hi-Tech | Interrupt based UART Problem

    hello ediamondsrt, TXSTA = 0x24; -----> are you using synchronous mode ??? SYNC = 0; SPEN = 1; TXEN = 1; BRGH = 1; SPBRG = 129; ***** you have to enable Peripheral Interrupt Enable bit**** SREN = 0; RCIE = 1; // Interrupt Enable CREN = 1; GIE = 1; i had enclosed...
  3. A

    lookink for codes of MPLAB program to move the motor

    Re: lookink for codes of MPLAB program to move the motor,i have pic16f84A Hi Zamzam Faya, go through this links https://www.edaboard.com/threads/76614/ with stile modification in code you can use this http://picprojects.org.uk/projects/ppc/index.htm regards amar
  4. A

    need help for controller to pc communication

    Hi Rahul, If you already find some solution for RF data communication its fine or you can try 433 MHz/2.4GHz ready modules available in local market … they bit cheaper may suits for your application. **broken link removed** **broken link removed** For communication between PC and micro...
See more

Part and Inventory Search

Back
Top