Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
But what is strange is that I run the same examples projects in different version of hsim (2.0, 3.0, 5.0, 6.0)
5.0 and 6.0 gives a larger simulation time in simple netlist, almost cost me twice time.
Re: Does "Cadence_SOC4.1_for_linux" support Place
In SOC package, you can do anything you need in the back-end process, even including synthesis via Ambit.
For AMD XP systems, update the kernel to kernel-2.4.20-xxxx.athlon
You will experience about 5% to 10% performance improvement.
For P4 with FSB800/HT/socket478, you "must" update your kernel to smp-2.4.20-xxx.i686 to enable your Ultra DMA IDE Harddisk.
For Dual XEON with FSB533/HT, you have...
Re: [question]which OS is more compatible with most of EDAto
By the way,
Do not use RH7.2.
The hardware supporting is so poor that it makes your installation
"TERRIBLE"
RH 7.3 with updated kernel can let you use the hardwares of the main
stream. But be careful, SATA and the newest Video...
Re: [question]which OS is more compatible with most of EDAto
In my experience,
RH7.3 with updated kernel (2.4.20-28.7 or higher)
is the most recommend-worthy.
I have two platform
Intel P4 3.4GHz HT/FSB800
4GB DDR400 RAM Dual-channel MEM enabled
I865Chipsets
AMD Barton 3200+
3GB DDR400 RAM...
Re: redhat 8.0 install problem on pc within intel 865 chipse
PLease set your BIOS configuration to the "most baisc" platform.
Do not use SATA. use only PATA
P4+I865 will run well on RH7.3 and RH8
Dear tochaHCM,
I forgot to copy license file to the installation directory. After I place license.dat in it before install, the installation succeeded.
Hi Guys,
I downloaded 3-CD iso for matlab7 (for multi-platform)
But I encountered segment fault in the installation.
Has anybody experienced matlab 7 for linux?
calibre 2004
Has anybody utilized Calibre 2004??
When I try the 2004.2_5.19,
I found it lag very much while compared with 2003 versions.
I use RH7.3 to run calibre 2004.2_5.19.
I found that it seriously lags while running verifications, no matter DRC, LVS or PEX. This situation is somewhat...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.