Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by AG-1

  1. A

    Is there any command to force GSM module to Search Network

    You can see the AT command AT+COPS. Regards.
  2. A

    gsm modem restarted while OUTPUT will turn ON/OFF.

    For more information you can see this theread: https://www.edaboard.com/threads/207589/ Regards!
  3. A

    gsm modem restarted while OUTPUT will turn ON/OFF.

    Do you have a flyback diode with the relay?: Your modem has the decoupling capacitors? Your microcontroller has the decoupling capacitor? Regards!
  4. A

    GSM Based Weather Reporting System

    For more precision, you can use his brother DHT22: DHT11 Maximun Accuray ±2ºC DHT22/AM2302 Accuray ±0.5ºC Regards!
  5. A

    Sensing current upto 5A from a 45VAC source using SenseFEt

    This thread can be interesting for you: https://www.edaboard.com/threads/291492/ Regards!
  6. A

    Digital photo printer RFID identifying

    Mifare operate, with the ISO 14443 standard, at 13.56 MHz , other standard also operate at 13.56 MHz: ISO 15693 Legic FeliCa Regards!
  7. A

    GSM Based Weather Reporting System

    Whith DHT11 sensor you save: ADC0808 LM35 HR202 Regards!
  8. A

    GSM Based Weather Reporting System

    You can get some ideas in my web: **broken link removed** Regards!
  9. A

    Q64 GSM/GPRS Pin out diagram

    In this link you can see the differences between the two modules: https://www.electronshik.ru/pdf/pdf/q/q64%20wavecom.pdf You can verify that both modules are almost identical physically. The illustration on page 29 (Figure No. 5.1-1) on the G64 integrator Manual show the position of the pins...
  10. A

    Q64 GSM/GPRS Pin out diagram

    You can see this guide: https://www.embeddedarm.com/documentation/third-party/ts-gsm1-Q64_Technical_Specification.pdf
  11. A

    PIC Webserver Data logger

    On your PC you can make an application to communicate with the webserver to read the data. You can build the webserver with a Xport module. You can create a web site, that contains the data to be read, on the webserver: **broken link removed** .....
  12. A

    i want to learn wavecom gsm programming any1 can help me?

    engshahrul: Wavecom module Q2501B is an older model (hard to find): **broken link removed** But you can find other models that also allow embedded applications: Telit GM862-GPS. Telit GE863-GPS. Cinterion XT65 Module.
  13. A

    i want to learn wavecom gsm programming any1 can help me?

    Wavecom modems are programmed with applications developed with Wavecom Open ATsoftware. **broken link removed**
  14. A

    [SOLVED] connect Wavecomm M1306B

    For Wavecom M1306B the correct RS232 connection is: SUB-D 9 Connection SUB D 15 Signal name 1 ---> 1 DCD 2 ---> 6 RX 3 ---> 2 TX 4 ---> 8 DTR...
See more

Part and Inventory Search

Back
Top