Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by a_horst

  1. A

    Plug & Cable for 2 twisted TX/RX and 24V (<1A) supply >=IP56

    Hi, I am right now searching for a Plug & Cable to transmit on two wires UART/TTL with a very low rate (512bit/s) and supply with 24V (<1A) on another two wires. Simply using RJ-45 etc. as a plug wouldn't be possible as it should be in total quite durable and at least fulfil IP56. As there...
  2. A

    Vibration resistant display up to 4g acceleration amplitude

    damn sry, indeed OLED was therefore also my plan actually a graphical monochrome with something around 128x64 respectively 2" with a driver and communicating with it serial via SPI or I2C
  3. A

    Vibration resistant display up to 4g acceleration amplitude

    Hi, I am quite struggling to find a reliable display for a meter project. It's of course rather easy to find one facing the also needed -40°C - +85°C, but when it comes to vibration resistance I usually just can find in some data sheets tests up to 1,5g (which often are not passed without...
  4. A

    [SOLVED] Looking for waterproof MCU development board enclosure with simple screen & buttons

    Looking for waterproof MCU development board enclosure with simple screen & buttons Hi, I am looking for a waterproof MCU development board enclosure with a two line alphanumeric LC display or small pixel TFT as well as some buttons (3-4 would be already enough) on it. I haven't decided yet...

Part and Inventory Search

Back
Top