Programmable automation controller (PAC) with GPRS modem

  1. gtur
    Efficient RISC ARM9 processor
    Integrated GSM/GPRS/EDGE modem*
    Linux 2.6.x operating system
    Ethernet f0/100 BaseT
    RTC and SRAM with power supply support
    2 x RS232, 1 x RS485
    8 digital inputs
    Digital outputs, transmitter outputs*
    Analog inputs: 0..10V DC, 0..70V AC
    Switch, user LEDs
    1GB NAND Flash, servicing of SD cards
    1-Wire interface*, USB (optional)
    Installation on DIN bus
    Modification on order

    Basic information
    Ready-to-use autonomous platform, tried and tested in installations in many countries of the world
    Designed for the needs of automation, telecommunications, remote supervision, and monitoring
    Full range of communications interfaces, including built-in GPRS communication*
    Service of standard protocols (e.g. MODBUS, SNMP), possibility of installation of dedicated user protocols
    Exceptional capabilities of data logging thanks to the built-in 1GB FLASH memory and servicing of SD cards
    Capabilities of presentation of web pages (Scada web) directly from the device for the purpose of visualization of current and archived data as well as remote control
    Ready software for creation of PLC ladder algorithms

    Hardware properties
    Adapted for constant operation under industrial conditions
    Efficient, energy-saving processor using RISC technology
    Large RAM memory for start-up of many independent services
    Rich set of I/O interfaces: including digital and analog inputs and outputs, RS232/RS485 serial ports, transmitter outputs
    Built-in Ethernet (LAN) and GPRS (WAN)* communication
    Servicing of the economic 1-Wire bus typically used for reading of temperature sensors*
    Possible hardware versions on special order (e.g. USB port), also with a log specified by the orderer (OEM versions)
    Software properties
    New firmware based on Linux Kernel 2.6.28 ensuring stability and security of device operation
    Possibility of operation with expansion modules for the purpose of increasing the amount of available interfaces (see accessories section)
    Ready tools and pre-compiled packs, service of VPN, SSH, SQL, PHP, JAVA, C/C++
    Developer tools and support of their use, instructions, informational materials
    Remote software updates
    Possible upgrade to the innovative iMod platform and NX Dynamics web modules
    Full technical support through a dedicated portal, super-standard design cooperation thanks to TechBase Solution Partner
    Typical method of use (3-function use:*C-L-V)
    protocol converter functionality*(Convert) - downloading of data from input interfaces, Ethernet, and its subsequent conversion and transmission to output interfaces or GPRS to external modules
    data logger functionality (Log)*- archiving of downloaded data with the option of its sharing in the form of a file, database, or data transmission to external systems (e.g. SCADA)
    function of access through web pages (Visualize)*- creation of a visualization by means of an internet browser for the purpose of inspection and reading of processed data and alarm states

    The device can be configured to fulfill the roles of typical devices such as:
    PLC controllers
    Serial port servers
    Protocol converters
    Programmable controllers
    GPRS/EDGE modems
    MODBUS Gateways
    SNMP Agents
    WWW servers with servicing of PHP and databases (WAMP)
    Test messaging gateways
    GPRS router, NAT
    E-mail, FTP, SSH, VPN servers and servers of other Linux system services

    Properties of adaptation to industrial conditions:
    Low energy consumption
    Battery-powered Real Time Clock (RTC)
    The WatchDog function ensures control of the operation of selected services at the hardware level
    Effective file systems used for FLASH memory, ensuring long, failure-free operation
    A compact, durable housing made from ABS plastic adapted to installation on a DIN bus
    Easy method of installation thanks to the use of disconnectable screw terminals
    No moving elements (ventilators, platter disks)
    Versions with extended operating temperature ranges

    Integrated GPRS/EDGE modem*
    The modem enables transmission in the GPRS standard as well as sending and receiving of text messages. NPE possesses specially designed hardware-software properties ensuring the functionality and economy of a connection:
    In the case of problems with the stability of a connection, the modem module has a hard modem reset function. This ensures independence from problems that can arise in the modem firmware, resulting in e.g. "freezing" of the modem.
    The pre-installed software ensures constant verification of the correctness of the GPRS connection and initializes it in the case of its disconnection (GPRS reconnect service)
    The multiplexing server of the modem connection ensures 3 independent channels of communication with the modem. Thanks to this, it is possible to, among other things, send and receive text messages during GPRS transmission.
    The capability of utilization of economic SIM cards with variable IP addresses thanks to the use of the DYNDNS service and further reduction of costs related to the GSM operator through the use of non-public IP
    Preinstalled software (firmware)
    Linux Kernel*version 2.6.28 with typical packs and tools
    libNPE Library*for servicing of device hardware interfaces and a tool for remote software updates (softmgr)
    GPRS pack*facilitating management of the GPRS connection and containing the functionality of monitoring connection status, multiplexing service*, DYNDNS service, and text-message service tools
    1-Wire Pack*enabling scanning and reading of sensors located on the same bus*

    Dedicated ready-to-use device software
    iMod*- an innovative software platform allowing for fast start-up and full exploitation of device capabilities without the need for writing programs. A fully configurable system reflecting typical C-L-V use (see clarification above).
    NX Dynamics*- a platform for fast and easy (drag and drop system) creation of WWW visualization>s and a web panel for NPE management through an internet browser.
    PLC*- software for creation of algorithms in the ladder system with the capability of operation on NPE, services the MODBUS protocol

    Expanded developer's platform, additional software packs
    An open and free*programming platform*based on the experience of thousands of programmers, a rich set of tools, and support of Linux system users
    Specially prepared*SDK*(toolchain, exemplary applications, ready packs)
    A rich set of*programming tools, among others, servicing of the C, C++, Java languages
    Tools for servicing ofdata bases*such as SqlLite, MySQL, PostGreSQL
    Servicing of*SSH, SSL and VPN
    Other tools and servers for communication

    NPE device search
    The SearchNPE*Application*helps to search for and configure NPE devices in the web. The application operates under the Windows and Linux systems
Results 1 to 1 of 1