Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS

HFSS
H

HFSS

Public Group
  1. About
  2. News feed
  3. Discussions
  4. Members
  5. Events
  6. Resources
  7. Media

Share this group

Quick Overview

Category
Uncategorized
Language
Total members
863
Total events
0
Total discussions
166
Total views
149K
Total albums
0
HFSS
M

Mariedj

Hello everyone. I need your help. I would like to know if it is possible to do a frequency analysis of a coil with HFSS? please
C
cherrybubble
Sure. Do u want to know coil inductance ?
X
Xeeshan143
yes ... from the analysis setup, select the sweep
C
cherrybubble
1. Edd coil modeling to HFSS and add 1 port modeling.
- Connect a port to one end of the coil and make the other end of the coil grounded by touching the boundary. Ensure that the other parts of the coil, except for both ends, do not touch the boundary.
2. Set the frequency, set the frequency range that u want to know the inductance.
3. Create the report >> Inductance => im(Z(1,1))/(2*pi*Freq) or L=(1/Y(1,1))/(2*pi*Freq) [H]

+Capacitance = im(1/Z(1,1))/(2*pi*Freq) or L=(Y(1,1))/(2*pi*Freq) [F]

Part and Inventory Search

Back
Top