willman microcontroller programer kit

Goto page 1, 2, 3 Next

EDAboard.com Forum Index -> Microcontrollers -> willman microcontroller programer kit

Author

Message

ful babu

Joined: 11 Nov 2004
Posts: 167
Helped: 11
Location: Singapore

27 Aug 2005 17:11 gtp usb

i need GTP USB and GTP USB-232 schematics, pcb can any one help ? and also want to kno the difference betn these two.

thx

metal

Joined: 21 Dec 2004
Posts: 369
Helped: 13

27 Aug 2005 20:34 gtp-usb

Hello

Download this one:

http://perso.wanadoo.es/siscobf/descargas/WinPic800.zip

it includes the programmer siftware and two folders for GTP USB and GTP USB-232 schematics.

Open the programmer and go to hardware setup, you will find lots of links, some contain PCB designs.

Good Luck

ful babu

Joined: 11 Nov 2004
Posts: 167
Helped: 11
Location: Singapore

28 Aug 2005 9:02 gtp usb plus

well, in schematic there is a inlet for RXD,TXD,RTS and DSR but no usb, so i am assuming i sud connect a standard usb-232 converter in there, am i right ?

thx

metal

Joined: 21 Dec 2004
Posts: 369
Helped: 13

28 Aug 2005 9:51 gtp usb programmer

Hey

I don't think it is really hard to get it, if you read the last post thoroughly, and examined the scematics, I am sure you will find two schematics, one for USB, and the other for RS-232.

So I don't know what are you talking about, USB-RS232 ??? What is that has to be done, convert RS-232 to USB or vice versa ??? I don't think you will need that, just adapt the one you need, build the circuit, and burn the PIC, thats all !!!

ful babu

Joined: 11 Nov 2004
Posts: 167
Helped: 11
Location: Singapore

28 Aug 2005 13:23 gtp-usb plus

well 2 questions in reply ,

1. then, why the schematic is named as GTP USB-232 if it is only a RS-232 port programmer, i.e. why it has 'USB' with it ?

2. in winpic800, in hardware settings there are 4 options, LPT, COM, USB, USB-232. so wat is the difference betwn 'COM' and 'USB-232' if they are the same ??

thx

Added after 11 minutes:

i was right indeed, here is a picture tat used a usb-rs232 converter

Sorry, but you need login in to view this attachment

metal

Joined: 21 Dec 2004
Posts: 369
Helped: 13

28 Aug 2005 21:48 gtp usb plus firmware

Hello

The options are for ports, there are some readly built modules to convert USB to RS-232, but I think this is waste of time, because you already got a schematic that connects directly to the USB.

Also, not all options you see are usable, for the GTP case, its just the USB, or RS-232. LPT is not applicable here.

Good luck

38gazili

Joined: 16 Sep 2005
Posts: 1

21 Sep 2005 21:44 gtp usb lite

Anyone know the schematic of "8/18/28/40 Pin ZIF Adapter " for Winpic800 programmer? I just want to make one. please help me .Thank you.

metal

Joined: 21 Dec 2004
Posts: 369
Helped: 13

22 Sep 2005 0:35 gtp-usb [ plus ]

Hello

In the hardware section of WINPIC800 you will find links for each supported programmer, follow the links and you will find schematics, and PCB designs you are looking for...

Good luck

wizpic

Joined: 23 May 2004
Posts: 380
Helped: 26

23 Sep 2005 1:26 gtp usb schematic

Metal

Quote:

In the hardware section of WINPIC800 you will find links for each supported programmer, follow the links and you will find schematics, and PCB designs you are looking for...

I have had a look through all the links in the hard ware but can only find the schematics and PCB for pogrammer and not the 40PIN ZIF socket i think like the that MELABS sell thats what the ohter guys after

well unless i'm blind. if anyone has got can you help us out

question for you boys and girls is the GTP USB programmer any good

cheers

wizpic

metal

Joined: 21 Dec 2004
Posts: 369
Helped: 13

23 Sep 2005 1:43 gtp usb lite programmer

Hello

Here is what the guys who built GTP stuff used for ZIF sockets....Hope its of help man Smile

BTW
No body is blind as long as they do the right search Wink

Sorry, but you need login in to view this attachment

thenorthstar

Joined: 10 Mar 2006
Posts: 5

28 Apr 2006 17:11 gtp-usb full

Hello

I have GTP-USB Lite programer and I used this,but I have same problem Crying or Very sad

I am programing another pic family but I don't programing 16F84a and 16F628 Crying or Very sad

I don't understand. I don't know where I make error.
please help me Crying or Very sad

gonenc

Joined: 03 Jun 2006
Posts: 1

03 Jun 2006 20:18 gtp usb plus schematic

"Hello

I have GTP-USB Lite programer and I used this,but I have same problem Crying or Very sad

I am programing another pic family but I don't programing 16F84a and 16F628 Crying or Very sad

I don't understand. I don't know where I make error.
please help me "

I solved that problem today by putting 100uF to the output of ICSP connector
(between VDD and GND) If you wish you can do the same for USB connectro side

The necessity for that comes from some pics uses much current so you need an additional supply or large capacitors for the output voltage (5V) not to dropout

For example: While using ICD2 you generally need an extra power supply

I sitll have problems (does not work with Winpic3.58 and resets when I touch the bottom of PCB)

Which hex and driver did you use

I hope it became usefull

Gonenc

ful babu

Joined: 11 Nov 2004
Posts: 167
Helped: 11
Location: Singapore

22 Jul 2006 19:38 gtp-usb programmer

any one have gtp usb+ schem. and hex ?

thx

Google
AdSense
Google Adsense

22 Jul 2006 19:38 Ads

nooknikz

Joined: 22 Apr 2002
Posts: 404
Helped: 22
Location: thailand

22 Jul 2006 19:39 gtp_usb

here

Sorry, but you need login in to view this attachment

wjr1955

Joined: 11 May 2006
Posts: 32
Helped: 2
Location: Sao Paulo BR

22 Jul 2006 20:18 gtp usb plus pcb

gonenc wrote:

"Hello

I sitll have problems (does not work with Winpic3.58 and resets when I touch the bottom of PCB)

Gonenc

GT USB Lite works only on Winpic800 3.55 version.

ful babu

Joined: 11 Nov 2004
Posts: 167
Helped: 11
Location: Singapore

23 Jul 2006 14:43 gtp-usb plus hex

nooknikz wrote:

here

i said gtp usb + "plus" not the gtp usb, my isp has blocked the domain http://perso.wanadoo.es/ so i cannt get into any information on tat page, i heard tat i hav to buy the ic for tat one, can any one explain me how to get

pic-novato

Joined: 05 Feb 2006
Posts: 50
Helped: 1
Location: Lima - Peru

23 Jul 2006 15:53 gtp-usb programer

Hello Fat Babu:

GTP USB PLUS is not free, you need to contact with Francisco (Sispic)

winpic800(at)hotmail.com

Have various opcion to buy, only the pic programmed, pcb, or programmer ready to use.

You need the software Winpic800, but its free.

If you have more cuetions maybe i can help you.

Regards.

ful babu

Joined: 11 Nov 2004
Posts: 167
Helped: 11
Location: Singapore

24 Jul 2006 15:05 pic usb schematic

pic-novato wrote:

Hello Fat Babu:

.... you need to contact with Francisco (Sispic)

winpic800(at)hotmail.com

Have various opcion to buy, ...

Regards.

first of all, ITS NOT FAT BABU it is ful babu, any way, no body is replyin form winpic800(at)hotmail.com ... can any tell me is he still he is alive ?

pic-novato

Joined: 05 Feb 2006
Posts: 50
Helped: 1
Location: Lima - Peru

25 Jul 2006 18:37 gtp usb pic

Ful Babu:

I make a mistake and apologize for it, but i only try to help you.

Sispic is still alive.

Any way, if you don't have good ways i can't help you.

Bye

phamxba

Joined: 27 May 2006
Posts: 4

28 Jul 2006 4:31 gtp usb firmware

I has make a GTP_USB board but it not working with WinPIC800 v3.59 I thinh if who can update the driver for Board (18f2550) it will be done ....but who can do,please post it for me
thanks advance
this my mail luongvanthieu(at)yahoo.com

PICUser

Joined: 15 Jun 2003
Posts: 45

23 Aug 2006 8:22 components of gtp usb programmer

Hi friend,
can somebody share with forum shematic or link from where to DL latest version of Melabs programmer ( supports usb and rs232 interfaces). I have old version (only RS232 interface).
Thanks in advane

Best regards

PICUser

wakaka

Joined: 07 Dec 2005
Posts: 238
Helped: 4

23 Aug 2006 9:08 gtp-usb

can anyone specify the connection pin from VPP, Vss, Data, Clock to PIC??

and for Vpp, Vpp2,Vss,Data Clock.
wats the difference between these 2 groups?

how to connect from GTP USB to PIC, need to include any passive components?

both can be used?? Y the upper part need an extra Vpp2??
tankx

wakaka

Joined: 07 Dec 2005
Posts: 238
Helped: 4

24 Aug 2006 2:57 gtp schematic

does it need any external power supply suring programming for the ICSP?? or it takes power supply from the targeting board??

shak

Joined: 29 Jul 2006
Posts: 5

29 Aug 2006 16:48 gtp usb plus hex

there is new microcontrollers and compatable with 8051
lik : c54u
usb 97c100
an212 ezusb

pic-novato

Joined: 05 Feb 2006
Posts: 50
Helped: 1
Location: Lima - Peru

29 Aug 2006 21:54 gtp programmer

Wakaka:

The ICSP don't need power from the Pic circuit, don't connect power from the GTP USB to power from the Pic circuit, only connect the ground of both circuits and Vpp, Data and Clock.

The GTP USB have to groups of connectors:

Vpp, Vss, Data and Clock for the ICSP.

Vpp, Vpp2, Data and Clock for the ZIF where you put the pics.

If youdon´t have the diagram for the ZIF, messege me.

Bye

phamxba

Joined: 27 May 2006
Posts: 4

30 Aug 2006 1:52 usb schema

I have consider the GTP_USB lite and GTP_USB i look out the different between that schematic is the Vpp2 on the GTP_USB so that they can building a simple socket for programming many chip on once. final, the my object is find the schematic and hex file for building o good programming board .
Who person really can help me and indicate clearly about that source .
Thanks advance .

Because notthinglast forever !