electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

Weighting Filter


Post new topic  Reply to topic    EDAboard.com Forum Index -> Digital Signal Processing -> Weighting Filter
Author Message
Ansunamu



Joined: 19 Oct 2001
Posts: 266
Helped: 4


Post11 Mar 2004 8:41   

Weighting Filter


what is weighting filter ? why it can be used to emphasis baseband frequencies ?

Any document introduce it ?
Back to top
brmadhukar



Joined: 21 Jun 2002
Posts: 844
Helped: 29


Post15 Mar 2004 7:45   

Re: Weighting Filter


Hi,

Simple moving average is a wieghing filter with equal weights. However we are normally more intersted in the information in most recent samples so we may give leeser weight to past samples than the recent sample. This weigh may be linear or exponential. and are usually low pass filters (hence base band).
Check out Lyons book.

BRMadhukar
Back to top
Ansunamu



Joined: 19 Oct 2001
Posts: 266
Helped: 4


Post15 Mar 2004 8:38   

Re: Weighting Filter


so ~ could i use the low pass filter as a weighting filter ? Tell me more about the book !

THX
Back to top
Google
AdSense
Google Adsense




Post15 Mar 2004 8:38   

Ads




Back to top
amarendra



Joined: 21 Feb 2004
Posts: 3
Helped: 1


Post25 Mar 2004 14:25   

Re: Weighting Filter


Weighting filters are Special filters used in measuring loudness levels, and consequently carried over into audio noise measurements of equipment. The filter design "weights" or gives more attention to certain frequency bands than others. The goal is to obtain measurements that correlate well with the subjective perception of noise.
Weighting filters are a special type of band-limiting filters designed to compliment the way we hear. Since the ear's loudness vs. frequency response is not flat, it is argued, we should not try to correlate flat frequency vs. loudness measurements with what we hear.
i hope you would be satisfied with it
Back to top
yyangzq



Joined: 21 Apr 2004
Posts: 12


Post22 Apr 2004 3:19   

Weighting Filter


Books or IEEE papers about weight filter are more and more.
key points is different weight have different coefficient.
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> Digital Signal Processing -> Weighting Filter
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
Weighting Vector in MRC - need guidance (2)
Step Response for cascaded filter & CIC filter (2)
Filter Doubts - what does it mean filter null point? (1)
what type analog filter fit low frequency narrow band filter (1)
Comparision of SC filter and GmC filter in audio frequency (7)
does Switch capacitor filter need antialiasing filter? (5)
Question-dielectric filter, SAW filter, ceramic difference (2)
what's the difference between an AR filter and MA filter (5)
Why do we use microstrip filter instead of simple LC filter? (9)
What is the purpose of interpolator filter (FIR filter) ? (2)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS