Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What capacitor to use?

Status
Not open for further replies.
Need a capacitor for high current and high frequency.
In other words,crucial is
- ESR and dV/dt

used, for example, **broken link removed**

I wonder compared to ceramic or other small SMD capacitors
 

An SMD ceramic cap would likely have lower series inductance and ESR than a leaded metal-film cap. I don't think dV/dt is a factor.
 

May be, on the other hand, when a large increase in the steepness of the voltage (dV / dt) ceramic capacitor may be damaged more easily than PP
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top