Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Using of ferrite rods in vlf antennas

Status
Not open for further replies.
A

adnan012

Advanced Member level 1
Joined
Oct 6, 2006
Messages
468
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
4,923
hi,

what is the purpose of using ferrite rods in vlf antennas? Is there any calculation required for designing such an antenna?
 

Ferrite rods offer the small size and a good directivity. In basic textbooks you can learn the details
 
Thanks for reply.
Can you suggest any text book for this topic?
 

Because of the effect of the powder iron/ferrite core, the inductance is increased by a large factor , meaning that less turns can be used to achieve the same inductance. though for maximum Q only air cored coils can be used.
Frank
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top