Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

The Internet Of Led Wall!

Status
Not open for further replies.

James_seeed

Newbie level 3
Newbie level 3
Joined
May 12, 2016
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
109
Here is the lovely tiny LED wall I made with Wio nodes. Every one can control it through the internet.

404971401248545043.jpg
There are 30 LED bars on the board, each bar has ten led. Every one in every where can control every bar he/she likes with the API of Wio link.

Here is the step to implement the Internet Of Led Wall.

1.Use the laser cutting to make a wood board to fix every led bar in sequence.
Here is the details of the laser cutting effect on a 5mm wood board.
242033596166342987.jpg

2.configure every I/O of the wio link or wio node.There are 30 I/O for 30 led bars.
Here I used wio node instead of wio link.
图片4.png

3.Connect the led bar to wio node grove interface with grove wire.
292954280611573907.jpg

4.Choose the number of the led you want to control, then send the relevant parameter to the API of the I/O.
1.PNG
5.Then you will see the amazing effect of the tele-controlling experience.If you are thousands of miles away, you can see the effect through Live broadcast!
627921026959560114.jpg

The broadcast of my Internet Of Led Wall is here: **broken link removed**
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top