Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RE: Seeking help in HFSS, half-wavelength dipole

Status
Not open for further replies.
S

StarLight

Newbie level 3
Joined
Dec 25, 2008
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,298
RE: Seeking help in HFSS, half-wavelength dipole

Hi to all,
I'm very new in using HFSS, therefore i need help from u guys. Does anyone know how to determine the radius, gap space & air box boundary for half wavelength dipole? I used 0.5 for dip_radius, 0.0125 for gap_scr and 5 times the dip_arm length for air box boundary. However, it do not work even with no error analysis. Can anyone help me???
 

RE: Seeking help in HFSS, half-wavelength dipole

what are the errors you are getting?
Upload project here or place snapshots.
Also one suggestion
There are lot of posts on this forum for Dipole simulation HFSS.
It will be helpful for you if you go through them.
 

oh..Thanks!! Below is my project. Thanks! I will take ur advice.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top