Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Please help identify SMD electrolytic capacitor

Status
Not open for further replies.
T

treez

Guest
Hi,

Please advise on what capacitor is this?, we need the voltage rating
SMD
Presumably electrolytic

Diameter = 6.5mm
Height = 5.3mm

Lettering on top as follows......

47
CFC.
T60
 

The coding is usually:

top line = value in uF
middle line = three characters, first is voltage, second and third are the device family. ( a trailing dot indicates Pb free)
bottom line = batch code

The voltage codes are:
j = 6.3V
A = 10V
C = 16V
E = 25V
V = 35V

So yours appears to be 47uF, 16V of type 'FC' . There may be other manufacturers but Panasonic do make an FC series of SMD electrolytics.

[afterthought] https://industrial.panasonic.com/ww...num-capacitors/aluminum-cap-smd/lineup#series

Brian.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top