please help - eagle 5.4 erc

[mortebela]

pcb eagle erc

I've laid out my board, and the only errors I have are from the SMA connectors, SMA-145-0711-821/826 in the con-coax library. The errors are dimension errors (see link to image). How do I fix this? Any help is greatly appreciated.

**broken link removed**

 

[hcet]

eagle erc dimension

First, this are DRC errors.

Have a look at your clearance settings.

Good luck, ep20k

 

[maheshkuruganti]

eagle erc

It just means that the Boundaries are Overlapping and hence will be a mechanical problem.