Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

PCI Express connector solderability question

Status
Not open for further replies.

edaenrico

Member level 4
Joined
Apr 19, 2010
Messages
76
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Activity points
1,864
Hi,


PREFACE
--------
I'm trying to understand if I this connector can be soldered using the ordinary Wave Soldering process:
http://www.digikey.com/product-detail/en/10018784-10210TLF/609-2029-ND/1002344


Here's the datasheet:
**broken link removed**


I don't understand the following point:
"2.6.2 Solder washers, AFCI part number 78523-001, shall be applied to the tails,
and the connector vapor phase reflowed at 215°C (419°F) for a time not to exceed 2 minutes."


QUESTION
----------
Can the connector can be soldered with the ordinary Wave Soldering Process?


Thanks,
Enrico Migliore
 

Can the connector can be soldered with the ordinary Wave Soldering Process?
Yes. Refer to the part description a fciconnect.com
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top