Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to express main lobe beamwidth in HFSS (Ansys) optimization?

Status
Not open for further replies.
tony_lth

tony_lth

Advanced Member level 5
Joined
Jul 28, 2010
Messages
2,089
Helped
377
Reputation
756
Reaction score
368
Trophy points
1,363
Location
Beijing
Activity points
12,649
Hi, Gurus,
I want to optimize main lobe beamwidth in HFSS, but I don't know how to express it in Ansys HFSS.
In the results of HFSS, I can create a chart to display gain vs theta (@phi=0 & 90deg).
I can read the beamwidth from the 3db points of the gain curve.
But when I want to set the beam width as the HFSS opt target, I don't know how to expressing it in the optimization setting.
Any help or comments is grateful.
Best,
Tony Liu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top