Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Flat cam and altium *.drl configuration ?

Status
Not open for further replies.
B

bianchi77

Advanced Member level 4
Joined
Jun 11, 2009
Messages
1,313
Helped
21
Reputation
44
Reaction score
20
Trophy points
1,318
Location
California
Activity points
9,442
Dear Members,

What's *.drl configuration from Altium for FlatCam ?
I got this display from Flatcam :
2021-03-18 11_38_56-FlatCAM 8.5.png


Any ideas ?
Thanks
 

I had this issue, once you have created the gerber files don’t save them or export them. Then I use the original file to export drill file and save the drill file making sure the setting are set the same.
I found once you created your gerber files then saved them things mess up
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top