Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Difference between BSP and device drivers ?

Status
Not open for further replies.

kk2mkk

Member level 2
Member level 2
Joined
Apr 20, 2006
Messages
44
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
Hyderabad India
Activity points
1,622
bsp drivers

can any one summarize the difference between BSP and device drivers ?

thanks in advance
kk
 

bsp driver

look, BSP is the set of your hardware driver. If you have windows mobile or CE already instaled and want to add some new hardware, you don`t need another bsp, but another device driver. When you will compile windows for the very first time, you need a set of drivers of you hardware. Normally, your vendor provides it. Were i clear? good luck!!

Breno
 

bsp device driver

Actually a collection of hardware(device) drivers is nothing but the BSP(Board Support Package) of the Main Hardware,where the Board(Main Device) is comprised of the included Hardwares(Devices) .

If you are interested to add some other hardware to your main board then you don't need to change the BSP, but you must have to add the Device Drivers of those new Hardwares .
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top