Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] binary to 7segment counter

Status
Not open for further replies.
N

nanock

Member level 1
Joined
Mar 13, 2011
Messages
40
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,564
hi friends,
i think we can change bcd to 7segment display by ic 7447.
do know any ic that can change binary to 7seg?
even if 2 segments are acceptable!
thanks
 

The 7447 displays unique patterns when fed input values 9 to 15. I forget what they look like.

Spec sheets for the 4511 and 4543 give 'blank' for values above 9.

An internet search turned up this chip (ICM7228) which shows letters A through F for input values 10 to 15.

**broken link removed**

And the DM9368 from DigiKey

https://media.digikey.com/pdf/Data Sheets/Fairchild PDFs/DM9368.pdf
 
Last edited:
  • Like
Reactions: nanock

    N

    nanock

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top