Gerry_robotics
Member level 1
Hi Folks,
I've recently acquired a Vintage Altera LP6 Logic Programming card and the PL-ASAP2 MPU setup with the Adapter Base and a series of different adapters.
I have successfully interfaced it to an old computer and got the unit to function with the MAXPLUS2 Stand Alone Programmer software....
so all is well.
My question lies on a set of Jumper pins on the LP6 card and I am curious to their function.
The Manual makes no reference to them but I would like to know what their purpose is. I'm hoping someone here may have used one of these LP6 cards in the past and could shed some light on the subject.
Some Photos Below:
Altera LP6 Logic Programming Card
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_ 012.jpg
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_ 017.jpg
DB25 MPU Base Connector - Via 25 Pin Ribbon cable
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_ 003.jpg
LP6 ISA PCB TABs
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_ 004.jpg
The Image Below shows the Jumpers in Question. They are located beside the ISA BUS address Dip switch box. The Jumpers are Highlighted in Light Blue.
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_Jumpers.jpg
So if anyone by chance has any information on these Jumpers, please let me know.
Kind Regards,
Gerry O'Brien
My Gameboy Electronics Group:
GAMEBOY_Electronics : GAMEBOY_Electronics
I've recently acquired a Vintage Altera LP6 Logic Programming card and the PL-ASAP2 MPU setup with the Adapter Base and a series of different adapters.
I have successfully interfaced it to an old computer and got the unit to function with the MAXPLUS2 Stand Alone Programmer software....
so all is well.
My question lies on a set of Jumper pins on the LP6 card and I am curious to their function.
The Manual makes no reference to them but I would like to know what their purpose is. I'm hoping someone here may have used one of these LP6 cards in the past and could shed some light on the subject.
Some Photos Below:
Altera LP6 Logic Programming Card
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_ 012.jpg
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_ 017.jpg
DB25 MPU Base Connector - Via 25 Pin Ribbon cable
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_ 003.jpg
LP6 ISA PCB TABs
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_ 004.jpg
The Image Below shows the Jumpers in Question. They are located beside the ISA BUS address Dip switch box. The Jumpers are Highlighted in Light Blue.
https://www.digital-circuitry.com/IMAGES/My%20LAB/Altera/LP6/1600_X_1200/Altera_LP6_Jumpers.jpg
So if anyone by chance has any information on these Jumpers, please let me know.
Kind Regards,
Gerry O'Brien
My Gameboy Electronics Group:
GAMEBOY_Electronics : GAMEBOY_Electronics