Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Clock set up in Proteus for PIC24

Status
Not open for further replies.
N

Nandulal

Member level 5
Joined
Feb 23, 2006
Messages
91
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,288
Activity points
1,850
I'm fighting with the problem for setting clock in proteus for PIC24. I've tried all the cock source options given but the simulation is runnig very very low speed.

Can anybody suggests how to set the oscillator clock for PIC24 in proteus?

Thanks in advance.
Nandulal K. Gavali
 

Setting the clock speed in Proteus is a matter of editing the schematic component for the PIC and typing in the value beside the 'Clock Frequency' property.

The very last thing you want to do is hang an oscillator off the pins. The simulation model will ignore it and it will cripple simulation performance.

We do it this way both because simulating the oscillator is rarely of any interest to the development/testing of the system and also because the overhead involved in doing the math on a fast oscillator is huge.

If you need the components on the schematic for physical PCB layout further on in the process, edit them and select the 'Exclude from Simulation' option.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top