Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SIMPLE QUESTION ON b+

Status
Not open for further replies.
R

rascabuche

Member level 3
Joined
Jan 29, 2006
Messages
54
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,607
where does B+ originate from in a tv set??. Is it from the regulator ic or from the flyback?? and where do i test to find this B+??
Rasc
 

If I am not wrong, I read that the B+ comes from the Battery positive connector/pole used in old vacuum tubes/valve operated equipment (radios).
 

    R

    rascabuche

    Points: 2
    Helpful Answer Positive Rating
Also, the B+ comes from old power supplies that is connected to the vacuum tubes plate.
 

    R

    rascabuche

    Points: 2
    Helpful Answer Positive Rating
B+ is generated while the battery of the TV set is discharging and B+ is distinguishable only when that battery is connected to some vacuum tube or
capacitive medium directly.

Added after 4 minutes:

B+ is generated while the battery of the TV set is discharging and B+ is distinguishable only when that battery is connected to some vacuum tube or
capacitive medium directly.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top