Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

connect nokia 3310 to at89c51

Status
Not open for further replies.

suriadin01

Junior Member level 3
Joined
Apr 17, 2007
Messages
26
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,412
at89c51 gsm

helloo friend.........
i'm need some help. i'm student last year, now i'm doing my thesis. my thesis is sending message using 3310. the message is contain data from digital hour watt metre by serial data cable but i confuse about how i can connect my nokia 3310 to microcontroller at89c51, and how to control that. the point of my thesis is how to control nokia 3310 using at89c51 so that when i request data by sending message to 3310 from another cell phone. the 3310 can repply data automaticaly to cell phone who making request.
i need all of informations about that......please
 

Your problem is already discussed here:

I suggest using different microcontroller which has bigger RAM, since you will use it a lot.
 

first of all you are not sure what you intend to use . if you want to use at commands then your mobile must have a gsm modem inside it . if not then things might not be that easy for you . i have interfaced a 6210 with an 8051
it seems difficult in the beginning but at the end it looks very simple
get a gsm modem or mobile that has one ,along with its data cable that has a rs-232 connecor at its end and start experimenting on hyperterminal
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top