Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

13 bit Barker modulation - please help!

Status
Not open for further replies.
T

Thinh

Junior Member level 2
Joined
Mar 31, 2002
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
70
13 bit Barker modulation

Hi all,

i have a gigatronics 12720A microwave synthesizer and want to use it to generate 13 bit Barker code at 200Mhz carrier wave for testing my signal receive block.

can anybody tell me how to do

thanks in advance
 

try this

You can probably wire up a shift register 13 stages long and loop the output back to the input. Preload it with the code and then clock it around in circles. capacitive couple this to your signal generator modulation input.
 

I had a look at the datasheet on line and it seems that no special modulation feature is included in the instrument.
So be aware of the max freq, amplitude and shape of the signal you apply to modulation input, otherwise you'll get a wrong spectrum.
Mazz
 

make your own modulator

You can make your own modulator by putting the digital signal and the generator output to a mixer.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top