Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to define port in feko

Status
Not open for further replies.
M

mainak001

Member level 3
Joined
Dec 1, 2005
Messages
60
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Location
India
Activity points
1,632
I am designing a edge fed patch antenna in feko. But when defining the port in feed line , there are three options available . wire port , edge port and microstrip port .

According to my thinking this port shd be edge type . But at the time of defining a positive part and negative part options are shown by FEKO. I do'nt understand how to define my str .
Please help me. ....
 

I suggest you should use IE3D.IE3D is more convenient comparatively.
 

    M

    mainak001

    Points: 2
    Helpful Answer Positive Rating
the feko online/user manual explains how to define an edge port.The example folder of feko also contains a few examples for an edge fed rectangular patch antenna.
 

d2_asimov said:
the feko online/user manual explains how to define an edge port.The example folder of feko also contains a few examples for an edge fed rectangular patch antenna.
Click to expand...

That is true but only for inifinite substrates. There are are no SEP examples with an edge port for a finite substrate!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top