Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Temeprature measurent using NTC

Status
Not open for further replies.
S

saudrehman

Member level 1
Joined
Dec 20, 2005
Messages
40
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,697
i have to design a temperature measurement network (bridge)using NTC ,
with following characteristics:
Voltage range 0-50degress
Voltage output at 0 degree celsius :2.73V
resolution 10mV per degree kelvin
Is such linear response possible using thermistor
 

saudrehman,
NTC thermistors are inherently non-linear. They can be "linearized" with various combinations of parallel and series fixed resitors. See the Microchip application note:
. h**p://ww1.microchip.com/downloads/en/AppNotes/00685b.pdf
Regards,
Kral
 

what about LM34 and LM35 Temperature sensors?
converts temp. ro voltage! (10mV per 'C)

**broken link removed**

**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top