Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Co-Polarized and Cross-Polarized radiation plot

Status
Not open for further replies.
H

h.faiad

Newbie level 4
Joined
Nov 29, 2005
Messages
6
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,310
Dear All:
I would be thankful if someone could send me some tutorials on how to draw the cross-polarized radiation plots of an antenna via Ansoft HFSS.

Or any useful information, that would be grateful,

Regards,
 

Dear faiad
One should know, in what direction the co pol and cross pol of the antenna is.
It would be helpful for one to visualise if the axis of the antenna is algned along the Z axis of the coordinate system.
Now for the procedure.
1)One should first enclose the entire structure or that part from which radn is significant by a box ( rect) or cylinder.
2)The sides should be atleast a quarter of wavelength away for the radng structure.This box must be defined as a radn boundary.Also subtract the stucture form the box and etain it.
3)The dstance has to be then increased in steps till the results converge.This is part important for high cross pol levels.
Hoping that this is helpful.

Click on helped me
 

    H

    h.faiad

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top