Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

burning code in a microcontroller

Status
Not open for further replies.
J

jayavardhan

Full Member level 2
Joined
Sep 1, 2006
Messages
124
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,296
Location
India
Activity points
1,840
microcontroller burning

can we burn a code in a microcontroller by using i2c protocol.


pls reply sooon.

Thanks in advance.

Regards,
Jayavardhan
 

burning microcontroller

yes it can definitely be done...

which uC do you want to program with I2C?? check out the links for some ideas..

for AVR - **broken link removed**

for PIC - http://www.winpicprog.co.uk/pic_tutorial6.htm


did this help??

regards,
wiztronix
 

how to burn a code into microcontroller

If Philip's 8051, you can burn with FlashMagic.
 

microcontroller burn

wiztronix said:
yes it can definitely be done...

which uC do you want to program with I2C?? check out the links for some ideas..

for AVR - h**p://www.avrprojects.net/articles.php?lng=en&pg=72

for PIC - h**p://www.winpicprog.co.uk/pic_tutorial6.htm


did this help??

regards,
wiztronix
Click to expand...

wiztronix do you read what jayavardhan asked about ???

He asked if it's possible to burn code in a uC using I2C NOT if he could interface a uC with a I2C memory.

Both link's you post are examples of how to interface a uC with a memory. Please read and understand what you paste before doing it.

jayavardhan,
I work with PIC's and I have same friends and they work with Motorola, none of us have never heard about it. You could put code into a uC in some ways, but not via i2C, at least PIC and Motorola uC.
sci-3d post to you a way of put code into Philips or NXP uC via RS-232, but it isn't i2C.

By,

GuillerMo (AR)
 

burning codes into pic

hi,

i'm working on renesas controller.i know that the code can be burnt by using sci i want to know that the same thing can be done by using i2c.

Thanks in advance .

regards,
Jayavardhan.
 

how to burn 8051 in uc

ADuc7026 has a built-in bootloader with i2C and UART.
So you can "burn" your code with i2C for this micro.
is sci <-> spi?
 

microcontrol burning

just place controller & burn hex file in it
 

burn code in microcontroller

Hello again,

What do you mean when you said "sci" ???

By,

GuillerMo (AR)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top